Description
Pro Series Pumps S3033-NS 1/3HP Cast-Iron / Stainless Steel Submersible Sump Pump, 1-1-1/2″ Discharge, 10′ Power Cord, 3,000 GPH (50 GPM) at 10 ft. lift.
Features & Benefits:
- Cast-iron/stainless-steel construction
- ⅓ HP pump
- Cast-iron/stainless-steel construction
- Energy-efficient permanent split capacitor (PSC) motor
- Premium pump construction
– Water cooled motor (no cooling oil)
– Upper and lower sealed ball bearings
for ultra-quiet operation
– Stainless-steel fasteners for long life
– Dual carbon/ceramic seals plus
(1) Buna-N-Seal
– Thermally protected
– 10 ft. pump cord - 1½” discharge
- Continuous duty rated
- Will fit in 10” diameter sump pit
- S3 Series Energy Savings: Average $55* per year
- 5-year warranty when purchased from and installed by a contractor; otherwise 3 year
Compatible Switches:
| Dual Float | Vertical Float | Tether Float |
| DFC1 | VS | TS |
| DFC1.5 | VSC1.5 | TSC1.5 |
| DFC2 | VSC2 | TSC2 |
| DVSA-DF | DVSA-VS |
Technical Downloads:
- Pro Series Pumps S3033-NS: Brochure
- Pro Series Pumps S3033-NS: Manual
S3033-NS Specifications:
| Motor – HP | 1/3 HP |
| Flow @ 10 ft. GPH (3 M.) | 3,000 GPH |
| Flow @ 10 ft. GPM (3 M.) | 50 GPM |
| Max. Head | 30′ / 9.1 m |
| Pump Discharge | 1.5″ 3.8 cm |
| Amps. @ 10 Ft. Total Head | 4.0 Amps |
| Weight | 20 lbs. / 9.1 kg |
| Width | 7.9” / 20.1 cm |
| Depth | 5.3” / 13.5 cm |
| Height | 13.0” / 33.0 cm |
Switch Options:
| Switch Options | S3033 |
| NS Pump, with no switch |
S3033-NS |
| DFC1 Dual float switch with standard controller |
S3033-DFC1 |
| DFC1.5 Dual float switch with enhanced controller |
S3033-DFC1.5 |
| DFC2 Dual float switch with deluxe controller |
S3033-DFC2 |
| VS Vertical switch |
S3033-VS |
| VSC1.5 Vertical switch with enhanced controller |
S3033-VSC1.5 |
| VSC2 Vertical switch with deluxe controller |
S3033-VSC2 |
| TS Tether switch |
S3033-TS |
| TSC1.5 Tether switch with enhanced controller |
S3033-TSC1.5 |
| TSC1.5 Tether switch with enhanced controller |
S3033-TSC2 |
Reviews
There are no reviews yet.