Description
325-7AL series, Maxitrol 1-1/2″ gas line pressure regulator.
NOTE1: This product does not include 12A49 vent limiting device, which is required when regulator is installed indoors and eliminates the need to run the vent line outside.
NOTE2: This product is intended for installation by a licensed gas professional.
Features:
- Lever-acting design
- Positive dead-end lockup
- Precise control from full flow down to pilot flow
- Suitable for natural (NG), manufactured, mixed gases, liquefied petroleum gases and LP gas-air mixtures
- CSA certified & labeled
- Complies with ANSI Z21.80/CSA 6.22 (standard for line pressure regulators) and ANSI Z21.18 (as appliance regulator)
- For use with 2 psi piping systems such as CSST (corrugated stainless steel), semi-rigid copper tubing or black pipe
- Made in the USA
Technical Specifications:
- Inlet/Outlet Connection: 1-1/2″ NPT
- Rated Inlet Pressure: 2 psi (CSA Certified); 5 psi (w/ OPD); 10 psi (Maxitrol Rated)
- Outlet Pressure Range: 7″ – 11″ w.c. (White Spring)
- Factory-Set Pressure (w.c.): 8″
- Emergency Exposure Limits: 65 psi (Inlet Side Only)
- Capacity (Combined): 1,250,000 BTU/hr
- Max Individual Load (Single Appliance): 1,250,000 BTU/hr
- Operating Temperature Range (Ambient): -40 – 205°F
- Vent Connection: 1/2″ NPT
- Housing material: Aluminum
- Dimensions (L x H): 8″ x 7.3″
Reviews
There are no reviews yet.